Check this rating ·
Tinkercad: #6 among CAD software on Reddit
Every Reddit post and comment behind Tinkercad's rank and sentiment, with a link to each one, so you can count them yourself.
The rank
Tinkercad is named in 56 posts and comments across 11 of the 40 threads we counted: 5.0% of all brand mentions, rank #6 of 63 products named.
Sentiment
- Positive 24
- Neutral 18
- Negative 14
An AI model read each post and comment once and labelled how it treats Tinkercad, with a one-line reason. Net sentiment is the positive share minus the negative share of the labelled mentions. A model can misread sarcasm or a comparison, so each label below links to the comment it was given for.
Every mention
What is the best (and easiest) CAD software that is also free?
- PositiveComment, May 24, 2025Simple and a good starting point for beginners.
- NegativeComment, May 24, 2025Says Onshape is much better than Tinkercad.
- PositiveComment, May 24, 2025Calls it easiest and uses it for most files.
- PositiveComment, May 24, 2025Meets all the requested boxes.
- PositiveComment, May 24, 2025Great and browser-based, avoiding downloads.
- NegativeComment, May 24, 2025Used it occasionally but moved away due deal-breaking issues.
- PositiveComment, May 24, 2025Easiest to learn and runs on low-end hardware.
- NeutralComment, May 24, 2025Only names Tinkercad as an option without evaluating it.
- PositiveComment, May 24, 2025Great basic CAD program, used many times.
- PositiveComment, May 24, 2025Quick edits without long learning curve.
- NegativeComment, May 24, 2025Says missing fillets are a deal breaker for Tinkercad.
- PositiveComment, May 24, 2025Easiest for beginners.
- NegativeComment, May 26, 2025Warns it is hard to use precisely.
What is the best CAD software for a total beginner?
- PositiveComment, December 31, 2025Free, easy to master, and best for editing models.
- PositiveComment, December 31, 2025Recommends it, noting it is free.
- PositiveComment, December 31, 2025Recommended for ease of use.
- NegativeComment, December 31, 2025Implies it is only for young children.
- NegativeComment, December 31, 2025Says it is not a true CAD tool.
- NegativeComment, December 31, 2025Dissuades it because it does not work like conventional CAD.
- NeutralComment, December 31, 2025Names it only, no evaluation.
- PositiveComment, December 31, 2025Slightly prefers Onshape after basics; Tinkercad fine, Fusion also an option.
- NeutralComment, December 31, 2025Simplest but limited.
- NeutralComment, January 2, 2026Advises beginners on suitable parametric CAD software and workflows.
- NeutralComment, January 12, 2026Mentioned as a prior, simpler tool.
Still can't decide on which modeling software to learn. What would you recommend? Anyways; Here is (hopefully) my last TinkerCad project.
- NeutralThe post, February 6, 2026Great entry-level but not powerful; annoying for detailed prints.
- PositiveComment, February 6, 2026Recommends Fusion as intuitive and suggests a learning course.
- PositiveComment, February 6, 2026Says nothing wrong with it for beginners.
- NegativeComment, February 6, 2026Finds its limitations frustrating.
- PositiveComment, February 6, 2026Calls it great software to learn.
- NeutralComment, February 6, 2026Mentions it without clear praise or criticism.
- NeutralComment, February 6, 2026Noted as Autodesk pipeline to Fusion 360.
Are there any good freeware CAD programs?
- NegativeThe post, April 3, 2025Frustrating even for simple parts.
- PositiveComment, April 3, 2025Praises Tinkercad as fast and capable for simple parts.
- PositiveComment, April 3, 2025Praises TinkerCAD as intuitive but limited; Onshape only named as advanced.
- NeutralComment, April 3, 2025Mixed view: powerful but hard to learn and troubleshoot.
- NeutralComment, April 3, 2025Started with it but moved to Plasticity.
- PositiveComment, April 3, 2025Praises Tinkercad’s usability while noting limited long-term power.
- NeutralComment, April 3, 2025Explains Onshape constraints workflow and learning curve without clear judgment.
Which CAD software do you use for 3d modelling?
- NeutralComment, March 6, 2026usual tool but has limitations
- NeutralComment, March 6, 2026earlier tool
- NegativeComment, March 6, 2026Says it is poor for 3D printing and lacks easy fillets.
- PositiveComment, March 6, 2026Works for most simple geometric shapes.
Free CAD software
- NegativeComment, November 30, 2025Disparages Tinkercad as childish and less intuitive than another tool.
- NegativeComment, November 30, 2025Found it infuriating.
- PositiveComment, November 30, 2025Gives modest endorsement: not advanced but pretty solid.
- PositiveComment, December 1, 2025Calls it perfect for simple home needs and many creations.
What CAD app should I use?
- NeutralThe post, December 5, 2024Listed as one option under consideration.
- NegativeComment, December 5, 2024Judged too basic for someone with some CAD experience.
- NegativeComment, December 5, 2024Found too limiting.
Best beginner friendly CAD/modeling software?
- PositiveComment, November 23, 2024Recommends trying the website.
- PositiveComment, November 23, 2024Praised for teaching design basics and simple geometric models, with limits on complex edits.
- NeutralComment, November 23, 2024Mentioned only as a starting point.
What is the best cad?
- NeutralComment, November 22, 2024Listed as an option to try.
- NeutralComment, November 22, 2024Used for simple tasks without strong evaluation.
What 3d cad software to use
- PositiveComment, January 21, 2026Free and simple starting point for beginners.
Need CAD for a Startup
- NeutralComment, July 5, 2025Calls Fusion simplistic but says Onshape handles complex work.
How we count
For each category we search Google in the United States for the same ten buyer questions, each as written and again with "reddit" added. People also ask about one product by name, so each of the 15 products named in the most threads is searched as well: "site:reddit.com" with its website, or with its name when we have no website. We keep the Reddit threads Google shows. A thread whose title is about a different kind of product, or about no product at all, is left out, by the same check in every category. We read every remaining thread and count each post or comment that names a brand as one mention for that brand, whether it praises the product, compares it or complains about it.
A brand's rank is its number of mentions; share of mentions is that number out of all brand mentions in the category. Ties go to the brand named in more threads. Only posts and comments from the last 24 months count, a brand must be named in at least 3 separate threads to be ranked, and a category is published once it has 25 threads and 100 mentions. The count is redone every 30 days.
No brand list decides who can appear, and no brand is placed, moved or removed by hand. An AI model reads each thread and lists the products it names; we keep a mention only when the name is literally written in that post or comment. A second pass joins spellings of one product, so "VS Code" and "Visual Studio Code" are one row, and counts a tool that carries a product's name with that product, so "Claude Code" counts as Claude, "Gemini CLI" as Gemini and "Codex" as ChatGPT. It can still misread a name that is also an ordinary word.
Sentiment is read from the same posts and comments. A second AI model reads each one once and says whether it is positive, neutral or negative about each product it names, with a one-line reason: a comment that left one product for another counts against the first and for the second. A brand's net sentiment is its share of positive mentions minus its share of negative ones, from -100 to +100; it is shown once at least 10 of its mentions are labelled. Sentiment never changes a brand's rank. Every label can be checked: each brand's "Check" page lists every mention behind its rank, linked to the post or comment on Reddit, with the label and the reason.
Subgrow sells Reddit marketing, and some brands listed here may be our customers; they are counted like any other. Posts and comments written from accounts we run, or as work we arranged, are identified and left out of every number, and a thread we started is left out whole. No Reddit usernames are shown or stored with these counts.