Check this rating ·
Tinkercad: #6 among 3D modeling software on Reddit
Every Reddit post and comment behind Tinkercad's rank and sentiment, with a link to each one, so you can count them yourself.
The rank
Tinkercad is named in 77 posts and comments across 14 of the 34 threads we counted: 7.8% of all brand mentions, rank #6 of 68 products named.
Sentiment
- Positive 30
- Neutral 32
- Negative 12
- Not labelled 3
An AI model read each post and comment once and labelled how it treats Tinkercad, with a one-line reason. Net sentiment is the positive share minus the negative share of the labelled mentions. A model can misread sarcasm or a comparison, so each label below links to the comment it was given for.
Every mention
What's the best/easiest 3D modelling software to lean to use as a beginner?
- PositiveComment, March 24, 2026Calls it easy and fun.
- NegativeComment, March 24, 2026Found it too limiting for the project.
- PositiveComment, March 24, 2026Calls it easiest and has gotten good.
- PositiveComment, March 24, 2026Suggests it as a beginner start and useful for editing STLs, despite limits.
- PositiveComment, March 24, 2026Says it is easiest for beginners and quick to get running.
- NegativeComment, March 24, 2026Called easiest but not recommended.
- NegativeComment, March 24, 2026Hated it; felt counterintuitive.
- NeutralComment, March 24, 2026Good for basic shapes but inefficient and quickly outgrown.
- NeutralComment, March 24, 2026Cited as a drag-and-scale example, no judgment.
- NegativeComment, March 24, 2026Described as easy but too limiting.
- PositiveComment, March 24, 2026Good for basics.
- NegativeComment, March 24, 2026Disliked; shapes-only workflow does not suit.
- NeutralComment, March 24, 2026Used briefly before switching.
- NegativeComment, March 24, 2026Implied more limited than Onshape.
- PositiveComment, March 24, 2026Fun and easy, despite being limited.
- NeutralComment, March 24, 2026Listed as easiest to learn.
- NeutralComment, March 24, 2026Mentions importing models and small edits, without a strong view.
Preferred free program for designing 3d prints in 2026m
- NeutralComment, March 12, 2026No stated view.
- PositiveComment, March 12, 2026Easiest and great for quick simple designs.
- NeutralComment, March 12, 2026Listed only, with no evaluation.
- PositiveComment, March 12, 2026Calls it easiest by far.
- PositiveComment, March 12, 2026More powerful than people think and worth trying.
- Not labelledComment, March 12, 2026
- PositiveComment, March 12, 2026Highlights impressive models created with it and recommends exploring them.
- NegativeComment, March 12, 2026Discourages learning or trying it.
- NegativeComment, March 12, 2026Calls it unintuitive and like a basic bundled program.
- PositiveComment, March 12, 2026Calls it good for easy learning and quick generation.
- PositiveComment, March 12, 2026Describes it as easy, free, and good for beginners.
3D model programs for beginners?
- PositiveComment, February 24, 2025Recommended as a starting point that teaches the basics.
- PositiveComment, February 24, 2025Placed first in recommended learning order.
- PositiveComment, February 24, 2025Strongly recommends it for beginners.
- PositiveComment, February 24, 2025Basic but can still make cool things.
- NegativeComment, February 24, 2025Seen as too basic.
- NegativeComment, February 24, 2025Found it very frustrating beyond simple shape work.
- NeutralComment, February 25, 2025Praise for beginners is balanced by saying learned skills are useless.
- NeutralComment, February 25, 2025Very useful for basic modeling but weak with round shapes.
- PositiveComment, February 25, 2025Recommended for simplicity and ease of use.
Still can't decide on which modeling software to learn. What would you recommend? Anyways; Here is (hopefully) my last TinkerCad project.
- NeutralThe post, February 6, 2026Great entry-level but not powerful; annoying for detailed prints.
- PositiveComment, February 6, 2026Recommends Fusion as intuitive and suggests a learning course.
- PositiveComment, February 6, 2026Says nothing wrong with it for beginners.
- NegativeComment, February 6, 2026Finds its limitations frustrating.
- PositiveComment, February 6, 2026Calls it great software to learn.
- NeutralComment, February 6, 2026Mentions it without clear praise or criticism.
- NeutralComment, February 6, 2026Noted as Autodesk pipeline to Fusion 360.
What software do people recommend for modeling?
- NeutralThe post, January 18, 2026Mentions prior use but gives no current view.
- NeutralComment, January 18, 2026Only mentioned as prior software, without evaluation.
- NeutralComment, January 18, 2026Heard good things but cannot confirm.
- NeutralComment, January 18, 2026Used as comparison, no view given.
- NeutralComment, January 18, 2026Mentions using it for simple designs but expresses no clear product view.
- PositiveComment, January 19, 2026Designed for ease of use and friendly to new users.
- NeutralComment, January 19, 2026Fine for simple shapes but weak on constraints and alignment.
Ultimate Beginner Guide to 3D Modeling
- Not labelledThe post, December 6, 2024
- NegativeComment, December 6, 2024Calls it low-poly with mismatched polygon limits.
- PositiveComment, December 6, 2024Calls it a great starting place for learning basic 3D shapes.
- NeutralComment, December 6, 2024Source of designs; no direct judgment beyond export need.
- NeutralComment, December 6, 2024Comparison point for primitive modeling; no judgment.
- NeutralComment, February 3, 2026Considering it as a starting tool; no evaluation.
What software do you use for 3D printing modelling?
- NeutralComment, October 10, 2025Main tool, stated without praise or complaint.
- PositiveComment, October 10, 2025Calls it a fantastic program for complex designs.
- NeutralComment, October 10, 2025Used to create simple bounding cubes.
- PositiveComment, October 10, 2025Uses it most of the time.
- PositiveComment, October 11, 2025Recommends Onshape over FreeCAD and Tinker, citing easier modeling.
3D printing software - I tested them all and finally found one or two
- NeutralThe post, October 19, 2025Named as tested with no specific verdict.
- NeutralComment, October 19, 2025Used for simple or quick edits; no evaluation given.
- NeutralComment, October 19, 2025Described as simple current tool, no praise or complaint.
- NeutralComment, October 22, 2025Starting point, no clear evaluation.
What free 3D modelling software(s) do you guys recommend?
- NeutralComment, August 23, 2025Described as easy and online but limited.
- PositiveComment, August 24, 2025Free, simple, good starting point for beginners.
- PositiveComment, March 26, 2026Called underrated and easy to learn.
Beginner friendly 3D design programs ?
- NeutralComment, March 26, 2025Offered as a simpler alternative without clear evaluation.
- NeutralComment, March 26, 2025No specific praise or complaint mentioned.
- Not labelledComment, March 26, 2025
What is the most easy, free 3D modeling software?
- PositiveComment, November 24, 2024Stated as the simplest of free options for basic production.
- NeutralComment, November 25, 2024Good for objects but poor for organic sculpture.
Choosing software to create 3D models.
- PositiveComment, March 18, 2025Recommended for small business due to free licensing.
What is your preferred 3D modeling software for 3D printing?
- NeutralComment, December 27, 2024Still uses it, but needs to learn something new due to limits.
What is considered the "easiest" 3d modeling software?
- PositiveComment, June 25, 2025Described as the easiest option.
How we count
For each category we search Google in the United States for the same ten buyer questions, each as written and again with "reddit" added. People also ask about one product by name, so each of the 15 products named in the most threads is searched as well: "site:reddit.com" with its website, or with its name when we have no website. We keep the Reddit threads Google shows. A thread whose title is about a different kind of product, or about no product at all, is left out, by the same check in every category. We read every remaining thread and count each post or comment that names a brand as one mention for that brand, whether it praises the product, compares it or complains about it.
A brand's rank is its number of mentions; share of mentions is that number out of all brand mentions in the category. Ties go to the brand named in more threads. Only posts and comments from the last 24 months count, a brand must be named in at least 3 separate threads to be ranked, and a category is published once it has 25 threads and 100 mentions. The count is redone every 30 days.
No brand list decides who can appear, and no brand is placed, moved or removed by hand. An AI model reads each thread and lists the products it names; we keep a mention only when the name is literally written in that post or comment. A second pass joins spellings of one product, so "VS Code" and "Visual Studio Code" are one row, and counts a tool that carries a product's name with that product, so "Claude Code" counts as Claude, "Gemini CLI" as Gemini and "Codex" as ChatGPT. It can still misread a name that is also an ordinary word.
Sentiment is read from the same posts and comments. A second AI model reads each one once and says whether it is positive, neutral or negative about each product it names, with a one-line reason: a comment that left one product for another counts against the first and for the second. A brand's net sentiment is its share of positive mentions minus its share of negative ones, from -100 to +100; it is shown once at least 10 of its mentions are labelled. Sentiment never changes a brand's rank. Every label can be checked: each brand's "Check" page lists every mention behind its rank, linked to the post or comment on Reddit, with the label and the reason.
Subgrow sells Reddit marketing, and some brands listed here may be our customers; they are counted like any other. Posts and comments written from accounts we run, or as work we arranged, are identified and left out of every number, and a thread we started is left out whole. No Reddit usernames are shown or stored with these counts.